CI-2000 Series Bosch 2200cc  Fuel Injectors with Connectors/terminals and seals. 
 
Clean Injection CI-2000 Series injectors are Bosch Motorsport base injectors. Designed to suit setups requiring 60mm length injectors with 11mm inlet o-rings.  Injectors are high impedance so no resistor box/injector drivers are necessary.  
 
 
Clean Injection CI-2000 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retain a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms.  Every set of Injectors that leaves Clean Injection undergo extensive testing on industry-leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze. 
 
 
INJECTOR FEATURES:
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Direct Plug and Play Fit
Fast Response time
Consistent performance all the way to 7 BAR
Unlimited Mile Warranty
Stainless Steel Internals 
Compatible with all known race fuels including E85
 
Injector Specs:
Static Flow Rate (gasoline) 2200cc @ 43.5PSI 
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Electrical Connector: Nippon Denso
Fitted with Viton upper and lower o-rings.