2(pcs) Clean Injection CI2000 Bosch EV14 2200cc Fuel Injectors Mazda Rx7 1979-1994 Engine
 
Clean Injection CI2000 Series injectors are Bosch Motorsport base injectors. Designed to suit 1979-1994 Rx7 Engine. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW. Injectors are high impedance so no resistor box/injector drivers necessary.   Injectors will also come with Plug and Play Nippon denso to ev1 male plug and play injector connectors. Injectors are 48mm length with 14mm top and bottom viton orings.
 
 
Clean Injection CI2000 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms.  Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze. 
 
 
INJECTOR FEATURES:
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Direct Plug and Play Fit
Fast Response time
Consistent performance all the way to 7 BAR
2 Year Unlimited Mile Warranty
Stainless Steel Internals 
**Unacceptable Fuels: Gas/Petrol containing MTBE, specifically VP Q16 and VP Import or other MTBE oxygenated fuels**
 
INJECTOR SPECS:
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 210 lb/hr = 2200cc/mi
Coil Resistance: 8.8 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Fuel Pressure Range: 40-80psi
Minimum Pulse Width: 1.2ms
Maximum Duty Cycle: 93%
Electrical Connector:Sumitomo (Plug and Play Nippon Denso to EV1 adapters included)
Fitted with Viton upper and lower O-rings
48MM length with 14mm top and bottom orings.