CIean Injection CI-1200 Series Bosch 1200cc Fuel Injectors to suit Nissan Pulsar GTi-R (RNN14) and CA18DET S13 Silvia
Clean Injection CI-1200 Series injectors are Bosch Motorsport base injectors. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW. Injectors are high impedance so no resistor box/injector drivers are necessary.
Clean Injection CI-1200 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retain a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms. Every set of Injectors that leaves Clean Injection undergo extensive testing on industry-leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with a flow sheet with full data specs including injector latency/dead time data to make tuning a breeze.
When upgrading to the more common high-impedance injectors such as Bosch high-impedance injectors, the factory fuel injector resistor pack must be removed and bypassed. Resistor bypass plug available in our store.
INJECTOR FEATURES:
- Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
- Full Injector Latency Data Provided
- Tunable to factory Rock solid Idle
- Excellent Fuel Atomization
- Direct Plug and Play Fit
- Fast Response time
- Consistent performance all the way to 7 BAR
- 2 Year Unlimited Mile Warranty
- Stainless Steel Internals
- Compatible with all known race fuels including E85
Applications:
CA18DET:
1987-1988 Silvia S12 RS-X
1989-1990 Nissan Silvia/180SX S13 (International market)
1987-1989 Nissan Bluebird RNU12 SSS ATTESA Limited (Japanese Market)
1989-1994 Nissan 200SX RS13-U Europe.
1985-1990 Nissan Auster "1.8Xtt" and "Euroform Twincam Turbo"
SR20DET: N14 chassis (Code 54C)
1990-1994 Nissan Pulsar GTi-R
1990-1994 Nissan Sunny GTi-R
Injector Specs:
Static Flow Rate (gasoline) 1200cc @ 43.5PSI
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide 30 degree mist (single orifice)
Electrical Connector: ev1
Fitted with Viton upper and lower o-rings.
