Clean Injection CI-1000 Series 1000cc injectors are Bosch Motorsport base injectors. Designed to suit injector harness tequiering ev1 square connectors. Injectors have 14mm viton top and bottom orings with 60mm oring to oring length.
Clean Injection CI-1000 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms. Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze.
INJECTOR FEATURES:
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Direct Plug and Play Fit
Fast Response time
Consistent performance all the way to 7 BAR
22-YearUnlimited Mile Warranty
Stainless Steel Internals
Compatible with all known race fuels including E85
Injector specs:
Static Flow Rate @ 43.5PSI (300 KPa) = 1000cc/min
Coil Resistance: 12 Ohms / High Impedance / Saturated
14mm Inlet Diameter o-rings
60MM length
Factory fitted with Viton upper and lower o-ring
