4pcs Bosch 2200cc Fuel Injectors with plug and play adapters to suit OBD2 Honda/Acura Engine
Listing is for a set of 4 Bosch ev14 2200cc fuel injectors to suit 0BD2 Honda/Acura engine. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW. Injectors are high impedance so no resistor box/injector drivers necessary. If your vehicle is fitted with a factory resistor box then it must be removed. Listing includes plug and play injector adapters to allow the injectors to plug right into the factory OBD2 injector harness. No cutting or soldering wires necessary.
The injectors retains a consistent linear flow from 3 bar to 8 bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms. The injectors will support over 1000whp with correct tuning and fuel type. Injectors are sold in balanced sets to insure cylinder to cylinder horsepower equilibrium. Injectors will come with flow sheet with injector data and injector latency.
E85/Alcohol Compatible!
**Unacceptable Fuels: Gas/Petrol containing MTBE, specifically VP Q16 and VP Import or other MTBE oxygenated fuels**
Vehicle Compatibility Guide:
- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines! Contact me for correct adapter to suit.
INJECTOR SPECS:
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 210 lb/hr = 2200cc/mi
Coil Resistance: 12.4 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Fuel Pressure Range: 40-80psi
Maximum Duty Cycle: 93%
Electrical Connector: Nippon Denso
Fitted with Viton upper and lower o-rings
