CIean Injection 1300cc series Fuel Injectors with plug and play adapters to suit OBD2 Honda/Acura Engines
 
Looking to upgrade injectors without breaking the bank? Listing is for a set our 1300cc Series line of injectors to suit 0BD2 Honda/Acura engine. Perfect for the budget builder looking for rock solid reliability and superb performance for an excellent price. Injectors are covered under our 2 year unlimited mile warranty.  PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW. Injectors are high impedance so no resistor box/injector drivers necessary. If your vehicle is fitted with a factory resistor box then it must be removed. Listing includes plug and play injector adapters to allow the to plug right into the factory OBD2 injector harness. No cutting or soldering wires necessary.
 
The injectors are compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1.1ms. The injectors will support over 700whp with correct tuning and fuel type. The injectors has 30 degree  mist spray pattern with excellent fuel atomization resulting in superb idle conditions. Injectors are dynamically flow tested and matched on the industry leading ASNU Classic test equipment. They are then sealed and packed in balanced sets within 1 percent.  Injectors will come with flow sheet with full data specs including injector latency/dead time data for easy tuning. 
 
 
INJECTOR FEATURES:
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Direct Plug and Play Fit
Fast Response time
Consistent performance all the way to 5 BAR
2 Year Unlimited Mile Warranty
Stainless Steel Internals 
Compatible with all known race fuels including E85
Vehicle Compatibility Guide:
- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines! Please contact us for obd1 connectors .
 
 
Vehicle Compatibility Guide:
- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines! Please contact us for obd1 connectors. 
 
 
INJECTOR SPECS:
 
Static Flow Rate (gasoline) @ 3 BAR/ 43.5PSI (300kPa): 1365cc
Coil Resistance: 12.6 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: 30 degree mist
Electrical Connector: USCAR
Fitted with Viton o-rings
Includes lower to injector seal.