Set of 4 Clean Injection 1000 Series Bosch 1000cc injectors. Injectors have 14mm top and bottom o-ring and are 60mm in length. Injectors will come with plug-and-play ev14 to Nippon Denso connectors.
Injectors are sold in a balanced set and will include Injector flow data, latency/dead time data., and specs. The Injectors are HIGH impedance allowing them to be compatible with the factory ECU and support many aftermarket standalone engine management systems in the market.
The injectors are compatible with all known fuels including e85 and alcohol-based fuels. The injectors retain a consistent linear flow from 3bar to 8 bar fuel pressure. Bosch ev14 injectors are known to be very tuner friendly with fuel trimming down to 1ms. The injectors will support over 450+whp with correct tuning and fuel type. The injectors utilize a single 30-degree spray angle with excellent fuel atomization resulting in superb idle conditions. Injectors are sold in balanced sets to ensure cylinder-to-cylinder horsepower equilibrium. Injectors will come with a flow sheet with injector data and injector latency info.
INJECTOR SPECS:Static Flow Rate (gasoline) @ 43.5PSI :1000ccCoil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide 30 degree mist (single orifice)
Electrical Connector: USCAR
Fitted with Viton o-rings
Top Oring: 14mmBottom Oring: 14mm
Injector length: 60mm
