SR20 S14/S15 Anodized Purple Top-feed fuel rail conversion with Bosch ev14 850cc injectors, and SR20 Plug and Play Injector Sub Harness.  
   Looking to upgrade your fuel system and retain the factory intake manifold? Here at  Clean Injection we've designed a top-feed rail exclusively for the SR20 S14/S15 platform. We have bundled the kit with a set of Bosch ev14 850cc fuel injectors and plug and play sr20 injector sub harness. The only thing required is to plumb your fuel lines to the fuel rail.  Clean injection sub harness is designed using high temp TXL wire which meets SAW J-1560 requirements. TXL wires are protected using High Temp Nylon braided sleeves allowing the harness to handle engine bay temperatures ranging from  -59.8°F to 257°F. The TXL wires and sleeves are secured using heat shrink tubing lined with adhesive. This harness is designed using USCAR/EV6 Injector plugs making it a perfect swap for a clean and simple install. Includes temperature switch connector and late model Oval style temperature sensor connector. The harness is fully tested after assembly with a guaranteed turn key engine start.  No cutting or soldering wires are necessary. The fuel rail will include 2pcs -6 end fittings and 1pc -6 return port fittings.  We have also anodized coated our rails making it resistant to the corrosive nature of e85 high ethanol content fuels. Fuel rails are available in 4 different finishes (Anodized Blue, Black, Purple, and Silver/Aluminum). The injectors are flow-tested statically and dynamically on the industry-leading ASNU flow bench. Dynamic flow characteristics of a fuel injector is critical to a sound running engine. We make sure all injectors are balanced at different RPM points and pulse widths. Providing the end using with a set of injectors that will deliver precise cylinder to cylinder fuel delivery. Injectors will come with flow sheet and injector latency data for tuning. BOSCH EV14 injectors are e85/alcohol compatible. 
 
 
FITMENT GUIDE:
Kit is designed to fit all SR20DET and SR20DE S14 and S15 turbo and non turbo engine with factory/Standard Intake manifolds as pictured above. 
 
 
Injector Specs:
 
Genuine, reliable Bosch Injectors
Excellent response characteristics
Robust Design
High Impedance
Specifications:Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
 
 
Electrical Connector: Ev1 (listing includes plug and play connectors) 
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa):850cc
 
Items Included:
ev14 Bosch 850cc Fuel Injectors
New Anodized Purple sr20 s14/s15 top-feed fuel rail kit (includes mounting bolts and fittings as pictured)  
New 4(pcs) SR20 S14/S15 Injector sub harness with ev14 injector connectors
INTAKE MANIFOLD IS NOT INCLUDED